STROFT FC1 0,2mm 3,6kg 25m Crystal Transparent

Artikel im Vergleich

STROFT FC1 0.2mm 3.6kg 25m Crystal Transparent

Fluorocarbon fans who appreciate the special properties of FC (e.g. abrasion resistance, stretch/sensitivity, casting behavior, durability, visibility) use STROFT FC1 as leader and tippet material because this line has been trimmed for the highest possible knot strength. The STROFT FC 1 has probably the highest breaking strain ever achieved with 100% fluorocarbon lines. Particular attention is paid to tuning the knot load-bearing capacity, which is individually trimmed to the best values for each diameter. Due to this very important characteristic and the other advantageous properties of STROFT fluorocarbon, such as abrasion resistance, sinking behavior, fine load elongation, line elongation, casting behavior - fly leader tip, durability and visibility/invisibility, STROFT FC 1 is ideal for all types of leaders. Speaking of properties - one of the main differences between lines made of fluorocarbon and lines made of polyamide, which is often the subject of controversy in the trade press, is the stretch, or rather the stretch behavior under different line loads. For example, the blue curve of the polyamide alloys of GTM and ABR shows a wavy characteristic, while the black dashed characteristic of FC 1 is a straight line that intersects the blue curve at approx. 50% line load. In other words: In the high load range, FC 1 have a greater stretch than GTM and ABR, in the strike range the stretch of the lines is quite similar, in the fine load range the stretch of FC 1 is lower, in other words -> better sensitivity, feedback, bite perception. These are all characteristics that the user can clearly feel in practice. So if these fine load properties are required, FC 1 is also the first choice as the main line.